Step 4. Configure the HSSB Card
Procedure
- Click Start on the Windows task bar.
- Select Settings>Control Panel.
-
Do one of the following.
- Double-click the HSSB icon in the Control Panel.
- Click the HSSB icon on the Control Panel menu.
The HSSB dialog box opens.
- Select a node and click Setting. The HSSB: Node n dialog box opens.
-
Fill in the fields as follows.
Field Description Node Name Name for the machine connected to the HSSB card. CNC Type Select the appropriate CNC type from the drop-down list. I/O Port Address - When the HSSB dialog box is first opened, select Use PCI from a drop-down list.
- The field changes to read-only with an assigned port address after you reboot the computer.
- When the HSSB dialog box is first opened, select Use PCI from a drop-down list.
- The field changes to read-only with an assigned port address after you reboot the computer.
-
Click OK.
The HSSB dialog box re-displays.
- (Optional) Select a new node number and repeat the procedure to configure additional hardware.
- Click Cancel in the HSSB dialog box when all of the hardware has been configured.
Results
(For CIMPLICITY supported operating systems) The settings are immediately changed. No further action is needed.