2. DC2S: Object Properties

Open an Object Properties dialog box for an object with an DC2S class ID.

The tabs in the Object dialog box are:

DC2S General

The Object dialog box General tab provides data that precisely identifies the DC2S object.

Note: The Description field is the only Read/Write field on the General tab.

Each PPS function block has HMI properties.

When an Object dialog box is opened for a selected object, the values for these properties:

Can be defined in the Object dialog box.
Will display on the faceplate when it is first opened and as long as they are not changed.
(Some properties) May be changed by faceplate users who have a role with the required level.

The HMI properties required for the PPS Device Control 2 State block are as follows.


Field	Description		Data Type	Restrictions
Label	Object identification.		String
Resource	CIMPLICITY resource.		String	16 Characters or less.
State0 Command Text	Text on Button used to Command the Device to State 0.		String	12 Characters or less.
	Default	Stop
State1 Command Text	Text on Button used to Command the Device to State 1.		String	12 Characters or less.
	Default	Start