CIMPLICITYOption 3.2.2. Specify a Device Point Scan Rate
The components for specifying the scan rate are:
| Base Rate | Minimum rate at which device points can be polled on the port. |
| Scan Rate | Is a multiple of the Base Rate. |
Enter the frequency at which the CIMPLICITY device communications option will read this point's data, based on the port's Base Rate.
Example
The Base Rate is 5 seconds
The Scan Rate is set to 3.
The point is scanned every 15 seconds.
Note: If you define Trigger Settings for a point, the Scan Rate field is disabled.