11. Configure Alarming for Tracker

About this task

A Find the Tracker Alarms in the Workbench
B Change the Routing for each Alarm
C Test the Alarms
  1. Find the Tracker Alarms in the Workbench

Procedure

  1. Select Project>Alarms in the Workbench left pane.
  2. Scroll down the right pane until you find the PRT and RCO alarms.
    A CIMPLICITY alarms.
    B PRT alarms.
    C RCO alarms.
    1. Change the Routing for each Alarm
  3. Make sure the project is not running.
  4. Double-click PRT_DEL_REG_FULL or any of the other alarms.

    The Alarm Definition dialog box for that alarm opens.

  5. Select the Alarm Routing tab.
  6. Add your user role to the Configured roles for alarm box.

    Your role most likely is SYSMGR.

  7. Close the Alarm Definition dialog box.
  8. Repeat this procedure for all of the PRT and RCO alarms.
  9. Do a CIMPTRACK project configuration update.
  10. Restart the CIMPTRACK project.
    1. Test the Alarms
  11. Do the following.
    A Make sure the CIMPTRACK project is running.
    B Expand Runtime in the Workbench left-pane.
    C Double-click Alarm Viewer.

    The Alarm Viewer opens.

  12. Click Login! on the Alarm Viewer menu bar.
  13. Open the PRT_UI.
  14. Move blocks and carriers around the factory out of the correct order.

    Note: Review the alarms you enabled for regions for ideas to "break the rules."

  15. Watch what happens.