3.1.2. Check the Block's Attributes

About this task

The ABLK234 block should be assigned attributes that you entered in the prt_attributes.cfg file.

A Open the ABLK234 Block's Modify Item Dialog Box
B Check the General Information Tab
C Check the Attributes for ABLK234
D Close the Modify Item Dialog Box
  1. Open the ABLK234 Block's Modify Item Dialog Box

Do the following in the PRT_UI.

1 Select the ABLK234 line.
2 Click the Modify Item button. Note: you can also double-click the ABLK234 line.

The Modify Item Dialog box opens.

  1. Check the General Information Tab

Values that you entered when you created the item display on the General Information tab in the Modify Item dialog box.

Note: A Reference ID, which was entered automatically, is not manually used in this tutorial.

  1. Check the Attributes for ABLK234

Procedure

Select the Attributes tab in the Modify Items dialog box.

The attributes you entered in the prt_attributes.cfg file are listed in the Attributes box. These attributes apply to BLOCK items.

Feature Description Note
A Attribute Type Standard Attributes are selected.
B Attributes Attributes you entered in the TrackerCfg_UI are listed Attributes are stored in the project's backing files.
  1. Close the Modify Item Dialog Box

Click OK to close the Modify Item dialog box.

Note: You can also edit the block item's status in the Modify Item dialog box.