3.2. Add a Carrier to the LOAD_CONV Region

About this task

A Open an Add Item Dialog Box for the LOAD_CONV Region
B Enter General Information about the CARRIER
C List ABLK234 in the PRT_UI SCHEDULE Region
  1. Open an Add Item Dialog Box for the LOAD_CONV Region

Do the following.

1 Select LOAD_CONV in the Region Id dropdown menu.
2 Click the Add Item button on the PRT_UI toolbar.

An Add Item dialog box opens.

  1. Enter General Information about the CARRIER

Procedure

  1. Select the General Information tab in the Add Item dialog box.
  2. Enter/select the following.
    Field Value Note
    A Item ID ACAR567
    B Item Class ID CARRIER You will need a carrier to carry the block through the manufacturing process.
    C Item Type 00

    Note: You do not need to enter anything else on the General Information tab.

    1. Finish ACAR567 Configuration

    Click OK in the Add Item dialog box.

    Result: ACAR567 is listed in the PRT_UI LOAD_CONV region.

    1. Check the Modify Item Dialog Box>Attributes Tab
  3. Open the Carrier's Modify Item dialog box.
  4. Select the Attributes tab.

Results

No attributes are listed because you had limited the attribute assignment to blocks when you entered the list in the prt_attributes.cfg file.