3.3.1. Move a Block from the SCHEDULE to LOAD Region

About this task

A Open the Destination Dialog Box
B Select a Destination for CBLK234
C Confirm that the Block Moved
  1. Open the Destination Dialog Box

Do the following.

1 Select the SCHEDULE region.
2 Select the CBLK234 block in Location 3 to move.
3 Click the Move Item button on the PRT_UI toolbar.

Result: The Destination dialog box opens.

  1. Select a Destination for CBLK234

Procedure

  1. Select the LOAD region in the Region ID dropdown list.

    Notes The LOAD region is where you will load the Block onto the Carrier.

    Note:
    • The LOAD region is where you will load the Block onto the Carrier.
    • Insert is checked by default.
  2. Click OK.

Results

The SCHEDULE region displays in the PRT_UI.

  1. Confirm that the Block Moved

The available blocks should have changed in the SCHEDULE and LOAD regions.

  • SCHEDULE Region
  • LOAD Region

SCHEDULE Region

The SCHEDULE region now should have four blocks.

Blocks that were in Locations 4 and 5 should now be in Locations 3 and 4.

LOAD Region

CBLK234 is in the LOAD region's Location 1.