Open topic with navigation

Create an Inspection

Before You Begin

If the asset that you are using does not have any existing inspections, you must access it through the Asset Hierarchy.

Note: These following steps apply to both creating an inspection and to creating a checklist inspection..

Steps

1. Access the Inspection Management Overview for the asset to which you want to create an inspection.

2. Select the Inspection Assets tab, and then select the Equipment ID for the asset that you want to access.



3. Select the Inspections tab.

   

4. In the page heading, select , and then select Create Inspection.

The Create Inspection window appears.

5. Complete the required fields.
   • In the Inspection Families drop down box, select the type of checklist to attribute to the new inspection.
   • Optionally, in the Inspection Tasks drop-down box, select any tasks that you want to add to the new inspection.

6. Select Create.

   A new inspection is created for the selected asset.

Results

Inspection findings will be generated based on the settings for your Inspection Scope and your Inspection Profile.

• The new inspection is saved. You can modify the inspection by accessing the datasheet and then selecting to save your changes.
• Full Inspection Event Family findings will be automatically generated.
• Checklist Inspections will never be generated automatically.
• Other Event Families will require event configurations.

Copyright © 1993-2015 Meridium, Inc. All rights reserved.