Open topic with navigation

Create an Inspection

Before You Begin

If the asset that you are using does not have any existing inspections, you must access it through the Asset Hierarchy.

Note: These following steps apply to both creating an inspection and to creating a checklist inspection..

Steps

1. Access the Inspection Management Overview page for the asset for which you want to create an Inspection.

2. On the upper-right corner of the page, select , and then select Create Inspection.

The Create Inspection window appears.

3. Complete the required fields.
   • In the Inspection Families drop down box, select the type of checklist to attribute to the new inspection.
   • Optionally, in the Inspection Tasks drop-down box, select any tasks that you want to add to the new inspection.

4. Select Create.

   A new Inspection is created for the selected asset.

Results

• Inspection findings will be generated based on your Inspection Scope and your Inspection Profile settings.
• The new inspection is saved. You can modify the inspection by accessing the datasheet, and then selecting to save your changes.
• Full Inspection Event Family findings will be generated automatically.
• Checklist Inspections will never be generated automatically.

• Other Event Families will require event configurations.

• You can now access offline inspections.

Copyright © 1993-2016 Meridium, Inc. All rights reserved.