Configure the APM Connect Administration Center for the Studio

IMPORTANT: This step is required only if you have the APM Connect Studio license. If you are deploying APM Connect Base with a Basic or Plus License, skip this procedure and proceed to the next step in the APM Connect Base deployment workflow.

Steps

  1. Open a web browser.

    Hint: APM Connect is most compatible with Google Chrome or Mozilla Firefox web browsers. It is not recommend using Internet Explorer to access the APM Connect Administration Center.

  2. Enter the following URL into your web browser: http://localhost:8080/apmconnect/.
  3. If prompted, log in to the APM Connect Administration Center.
  4. In the Menu pane, in the Settings section, select the Configuration tab.

    The Configuration pane appears.

  5. Select the Svn (7 Parameters) group to expand the workspace.

  6. According to the following table, enter the necessary parameters.

    Parameter Description Recommended or Default Value
    Server location URL URL location of the SVN server. http://localhost/svn/MIAPMINT
    Username SVN user name created to use in the APM Connect Administration Center when installing the SVN server. APM
    Password SVN password created to use in the APM Connect Administration Center when installing the SVN server. Connect
    Commit Log Pattern SVN commit log according to your log format convention. {0}
    Library location URL URL location of the SVN external libraries directory downloaded with the Studio. Not Required
    Library username User name of the SVN user that has access to the libraries directory. Not Required
    Library password Password of the SVN user that has access to the libraries directory. Not Required

    The default parameters are configured as shown in the following image.

  7. Select the CommandLine/primary (5 Parameters) group to expand the workspace.
  8. According to the information in the following table, enter the necessary parameters.

    Parameter Description Recommend or Default Value
    Host The IP address of the CommandLine. localhost
    Port The port number on which the CommandLine is queried. 8002
    Job generation folder The path to the folder where Jobs are generated. <root:>\APMConnect\Utilities\cmdline\generationCache
    User component path The path to the folder where user components are stored. <root:>\APMConnect\Utilities\cmdline\custom_components

    The default parameters are configured as shown in the following image.

What's Next?

Copyright © 2017 General Electric Company. All rights reserved.