Open topic with navigation

Modify a Failure Mode

Before You Begin

This topic assumes that you have a pre-established RCM analysis with Functional Failures.

Steps

1. Access the RCM Module Overview page.

2. Select the analysis containing the Functional Failure to which you want to modify a Failure Mode.

   In a new tab, the Analysis Details (Analysis Details) workspace for the selected analysis appears, displaying the Analysis Overview (Analysis Overview) section.

3. In the left pane, select the function that contains the Functional Failure to which you want to modify a Failure Mode.

   In the left pane, the Functional Failures for the selected function appear.

4. In the left pane, select the Functional Failure to which you want to modify a Failure Mode.

   In the left pane, the Failure Modes for the selected Functional Failure appear.

   

5. In the left pane, select the Failure Mode that you want to modify.

   The workspace for the selected Failure Mode appears, displaying the Failure Modes (Failure Modes) section.

6. As needed, modify the values in the available fields.

   Note: To link an Asset to a Failure Mode, from the Related Asset ID box drop-down menu, the assets identified for the analysis (and listed under the Linked Assets Tab) appear. Select the Asset you wish to link to this Failure Mode. The linked asset appears in the Related Asset ID box.

   Note: Only Recommendations for Failure Modes linked to Assets may be promoted to ASM.

7. Select .

   The changes to the Failure Mode are saved.

Copyright © 1993-2015 Meridium, Inc. All rights reserved.