Third Quarter of 2018
Production Loss Analysis (PLA)
This topic provides a list of product changes released for this module on the dates listed below.
Release Date: September 21, 2018
Note | Tracking ID(s) |
---|---|
To improve usability, you can no longer perform the following tasks:
|
|
To improve performance, the following changes have been made:
| US267512 |
You can now create a mapping between Impact Codes and OEE Codes. To facilitate this enhancement, in the PLA Administrator page, the Codes workspace has been modified to display the following sections:
To create a mapping, the Map OEE Codes subsection for an Impact Code contains check boxes for each OEE Code. These check boxes are automatically selected for existing OEE Codes. You can, however, clear the check boxes to remove the mapping. Additionally, when you now create a Production Loss, in the Select OEE Code window, only the OEE Codes that are mapped to the Impact Code in the Impact Code box appear. | US254843 |
You can now specify a tolerance limit for the planned production of a Production Data record. To facilitate this enhancement, the Tolerance Limit (%) box has been added to the Settings window. The tolerance limit of the planned production determines whether a Loss Amount of a Production Loss for the Production Data record will be adjusted. Note: The Tolerance Limit (%) box is automatically populated with the value 0. You can, however, modify the value in the box.
| US254838 |
You can now indicate whether a Production Event needs a Root Cause Analysis (RCA). To facilitate this enhancement, a new field, RCA Needed, has been added to the Production Event family and the Production Event worksheet in the Production Loss Analysis (PLA) 2-Event Data Loader. | US254835 |
The Equivalent Downtime Hours field in Production Loss records is now disabled. | DE82991 |
Note | Tracking ID(s) |
---|---|
Previously, for users whose Culture setting required the comma to be used as the decimal separator (for example, German), the following issues occurred:
| DE88453 |
Previously, when adding or modifying a Production Loss, when selecting the OEE Code, selecting a subordinate option in the hierarchy did not clear the predecessor option selection as expected. This issue has been resolved. | DE81538 |
Previously, if you created a Production Plan from a Plan Template when the Review Plan Before Creating check box was cleared, the Plan Details and Production Data records were created per day regardless of the Data Entry Frequency specified in the Plan Template. This issue has been resolved. | DE80557 |
Previously, when creating a Plan Template, if you selected the Finish button more than once, multiple Plan Templates with the same name were created. This issue has been resolved. | DE62305 |