Second Quarter of 2024
Release Date: June 21, 2024
This topic provides a list of product changes released for this module on this date.
| Description | Tracking ID |
|---|---|
| When using the piping rotation workflow, you can now add piping bands of 36 and 48 positions to piping components. Note: When using piping bands of 36 or 48 positions, you can manage the TMLs in the same way as would do for other piping components and bands. However, the capability to rotate or flip the component is not supported. | 541744 |
You can now set the result grid column preferences for the following workspaces and sections:
To facilitate this enhancement, Advanced Settings is enabled for the result grid. The column preferences set on these result grids are saved as user preferences for the logged in user. | 350600 |
| Description | Tracking ID |
|---|---|
| Previously, in the Measurements section of a TML, the grid was not sorted correctly by the measurement taken date values. This issue occurred only if you used a culture other than English (United States). This issue has been resolved. | 537210 |
Release Date: April 5, 2024
This topic provides a list of product changes released for this module on this date.
| Description | Tracking ID |
|---|---|
| To enhance usability, you can specify the minimum thickness type as Output Node in Policy for a T-Min calculation, and the calculation will return the minimum thickness type as an output along with the T-Min value. For more information on T-min calculation, refer to the About the Calculated T-Min Value using Policy section in the Thickness Monitoring documentation. | US616242 |
| Description | Tracking ID |
|---|---|
| Previously, in the Analysis Output section, if you changed the value in the Analysis Type box, the link for the Thickness Measurement Location was not updated correctly. This issue has been resolved. | DE213486 |
| Previously, the Near Measurement Date and Near Measurement Value fields in a TML Corrosion Analysis were being set when there were less than three measurements. This issue has been resolved. | DE210712 |
| Previously, when you modified multiple Thickness Measurement values in the Readings field in the Readings window, the scroll button was not operational. This issue has been resolved. | DE209715 |
| Description | Tracking ID |
|---|---|
| When loading data using the Thickness Monitoring Data Loaders, you may experience degraded performance. | DE207334 |