V5.1.5.0.0
APM Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now cancel a Data Loader job after it has been initiated. Note: Only the user who has initiated the job or an admin can cancel the job. | 904968 |
Action Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when navigating away from the Action Management page to other tabs, error messages appeared randomly. This issue has been resoved. Now, you can navigate away from the Action Management page without any errors. | 825137 |
Asset Criticality Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when using the Data Loader, if you attempted to upload a file containing ACA Analyses in different states, the Data Loader showed a failed error even though the In-Progress Analyses were successfully uploaded whereas the Approved Analyses were not uploaded. This issue has been resolved. Now, the error message shows the list of Analyses that are uploaded and the ones that are not. | 851271 |
Asset Strategy Implementation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if you marked a Task List for deletion and then implemented an ASI Package to SAP, the changes for Task List deletion reflected only after you refreshed the page. Because of this, there were potential errors. This issue has been resolved. Now, the package is refreshed after sending to SAP. | 940832 |
| Previously, if time intervals such as hours or minutes were defined for Actions, the Sequencing functionality within the PRT report generation feature did not work as expected. This issue has been resolved. | 923937 |
| Previously, when importing Maintenance Plans from SAP into an ASI Package, the performance was poor. This issue has been resolved. | 914755 |
Previously, the Import from SAP functionality was failing if the existing Asset Strategy was in an active state. This issue has been resolved in the baseline database. However, existing customers must follow a workaround to manually resolve the issue:
| 894531 |
| Previously, when you attempted to update the status of a Work Management Item (WMI) using a Family Data Loader, the status changed on the backend but did not reflect in the user interface. This issue has been resolved. Now, changes to the status of a WMI using a data loader are properly displayed in the user inteface. Additionally, an ASI Admin option has been created to control whether Maintenance Plans and Items are displayed as Modified if any child WMI is modified. | 857564 |
| Previously, you could not export an Implementation Package if using certain customization. This issue has been resolved. | 815748 |
| Previously, when you attempted to clear the value in the Cycle box in the Maintenance Package datasheet, an error occurred. This issue has been resolved. | 742426 |
| Previously, if you deleted a Task list that was in the Added state, the child Operations were not deleted. This issue has been resolved. | 736502 |
Asset Strategy Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if you zoomed in significantly on the browser, the divider line in the header of the Actions and Risks workspace was not displayed properly. This issue has been resolved. | 940101 |
| Previously, if you created and ran an ASO simulation, and if the corresponding Asset Strategy was already open in another tab, there was no message that you must refresh the page to see the latest information. This issue has been resolved. | 922014 |
| Previously, when you attempted to change the state of an Asset Strategy from modified to proposed or from pending review to rework generated, an error occurred. This issue has been resolved. | 875815 |
| Previously, you could not access or create an Asset Strategy when using a 64-bit Chrome browser and a customized Risk Matrix. This issue has been resolved. | 864978 |
| Previously, when adding a Secondary Action to an Asset Strategy Template, an error occurred. This issue has been resolved. | 863940 |
| Previously, in the Risk Analysis workspace for a Controlled Strategy, the Risk Profile graph did not display the same date as the Master Template. This issue has been resolved. Now, the Risk Profile graph displays the same data that is available in the corresponding Master Template. | 842776 |
| Previously, when you promoted an Action from Reliability Centered Maintenance to Asset Strategy Management, an error occurred if you selected Undo Actions or if you attempted to delete the corresponding Asset Strategy. This issue has been resolved. | 742424 |
Asset Strategy Optimization
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if you created an Asset Strategy Optimization (ASO) Analysis from a System Strategy where any Asset Strategies are controlled by Master, the Optimize Strategy was not getting disabled until you refreshed the page. This issue has been resolved. | 870400 |
| Previously, in the grid view, when a validation error occurred and you corrected the data and saved, the validation error still appeared. This issue has been resolved. | 859000 |
Data Loaders
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| The Batch Type Data Loader functionality has been enhanced. In the previous version, if a Batch Key was present on worksheets other than the Key Entity worksheet, the data associated with the additional Batch Key was not loaded and you were not notified of this omission. Now, you are notified when records are ignored during a data load due to the missing Batch Key from the Key Entity worksheet. | 825228 |
| Description | Tracking ID |
|---|---|
| Previously, the date/time fields in Data Loader pages were always displayed in the UTC time zone. This issue has been resolved. Now, the values are displayed based on the time zone preference set in Security Manager. For instructions, refer to KBA 000071314. | 880620 |
Dashboards
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if you copied and pasted the UNC value in the link path rather than selecting it in the file browser, the link would not work after saving. This issue has been resolved. | 915762 |
Failure Modes and Effects Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to consolidate Recommended Actions, the toggle button to merge the selected fields did not work as expected. This issue has been resolved. | 923059 |
| Previously, you could upload an Approved FMEA Analysis using the Data Loader. This issue has been resolved. | 851182 |
| Previously, when you attempted to apply an FMEA Failure Mode template, an error occurred if the Author Name field contained an inactive user. This issue has been resolved. | 742402 |
Family Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when creating or modifying the Required or Disabled behaviour for a date field, you could not use a data type other than the date type to create a condition. This issue has been resolved. | 841378 |
Family Policies
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if a Sub Policy failed, the following error message appeared: No execution details. Because of this, the reason why the Sub Policy failed was not clear. This issue has been resolved. | 935302 |
| Previously, the Name column in a sub-policy node would freeze when the column was resized while browsing for policy names with long descriptions. This issue has been resolved. | 892145 |
Inspection Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you used the Inspection Management Assets or Inspection Management Functional Location Data Loader, and specified the task IDs in the Tasks Addressed field of an inspection in the Excel workbook, the Task Addressed field was not set correctly after performing the data load. This issue has been resolved. | 894631 |
Metrics and Scorecards
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the date values in the timeline charts as part of KPI changed based on the system timezone of the logged-in user, causing discrepancies between the chart and the tabular view. This issue has been resolved. | 870265 |
OT Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the retrieval of Tag Readings using the OT Connect Tag Node in a policy occasionally times out during execution. This issue has now been resolved. | 927591 |
Policy Designer
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if a Sub Policy failed, the following error message appeared: No execution details. Because of this, the reason why the Sub Policy failed was not clear. This issue has been resolved. | 935302 |
| Previously, when viewing Policy Execution History records, if the page size was set to more than 50 records, switching between policy instances resulted in inconsistent number of records displayed on a page. This issue has been resolved. | 933899 |
| Previously, the Name column in a sub-policy node would freeze when the column was resized while browsing for policy names with long descriptions. This issue has been resolved. | 892145 |
Production Loss Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when attempting to create a demonstrated line for a Production Analysis, the regression fit button was not appearing in the Production Weibull Plot window. This issue has been resolved. Now, the regression fit button appears as expected and the you can create a demonstrated line for a Production Analysis. | 877287 |
| Previously, there were performance issues when attempting to load the list in the Production Event Code field within a Production Event. This issue has been resolved. | 918582 |
Record Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to link a UNC path to a Reference Document by copying and pasting the drive folder, an error occurred if you selected the path after saving the record. However, if you selected the file manually from the file browser, you could link the Reference Document. This issue has been resolved. | 915762 |
Reliability Analytics
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the Communicate Findings tab if you added a user and navigated to a different tab, the changes were not saved. This issue has been resolved. Now, you are prompted to save your changes before navigating to another tab. | 875946 |
| Previously, an error appeared when deleting a Risk from the Analysis. However, when you refreshed the page, the Risk was successfully deleted. This issue has been resolved. Now, the selected Risk is deleted without the error message. | 871874 |
| Previously, in the grid view, when a validation error occurred and you corrected the data and saved, the validation error still appeared. This issue has been resolved. | 859000 |
Reliability Centered Maintenance
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to consolidate Recommended Actions, the toggle button to merge the selected fields did not work as expected. This issue has been resolved. | 923059 |
| Previously, when you attempted to apply an RCM Failure Mode template, an error occurred if the Author Name field contained an inactive user. This issue has been resolved. | 742402 |
Risk Based Inspection 581
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in Inventory Groups workspace, when you search for an Inventory Group in the Process Unit tree and navigate to the inventory group, no components are displayed to be linked to the inventory group. This issue has been resolved. | 915435 |
Root Cause Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the text within an RCA Event node label was displaying as distorted and outside the node boundary. This issue has been resolved. Now, the proper display of the text within the Event Node has been restored. | 888286 |
R Scripts
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the error message from an output parameter was generic and unclear. This issue has been resolved. Now, the error message is specific and includes the name of the variable. | 935322 |
Security Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the Security Users page, if the Timezone field was set to the Istanbul time zone, incorrect time was displayed. This issue has been resolved. | 817604 |
Thickness Monitoring
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when viewing the TML trends graph, the initial plot point was not displayed completely. This issue has been resolved. | 876315 |
Workflow Solutions
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
Conditional Checkpoints are now supported in the AHMA package. Conditional Checkpoints are displayed in Measurement Locations, and Conditional Steps are displayed in Measurement Steps. Using this feature, you can:
| 904854 |
In addition to the existing AHMA templates, templates have been added for the following types of assets:
| 867082 |
| Using the Asset Health and Maintenance Assessment (AHMA) package, you can now modify and reapply a template to the same asset. You can customize inputs and add, remove, or modify Health Indicators. | 856973 |
| Description | Tracking ID |
|---|---|
| Previously, filtering the AHMA dashboards involved selecting the filter in each dashboard. This issue has been resolved. To facilitate this fix, a dashboard query filter has been created. | 727468 |