V5.2.3.0.0
Action Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability and efficiency, you can now sort data in all the columns in the Strategy Actions workspace, excluding the Module, Implementation, and Health Monitoring columns. | 855698 |
APM Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Using Work Management Interface (WMI), you can now disable the SAP work order confirmation from APM to SAP. Note: WMI creates a Confirmation record in APM, containing the relevant SAP work order or notification details for your reference. For instructions on configuring this functionality, refer to KBA 000071400. | 693794 |
APM Connect now supports SAP Cloud Platform Integration (SAP CPI). The following enhancements have been added:
| 221644 |
| Description | Tracking ID |
|---|---|
| Previously, the parsing algorithm used in the Family Data Loader to identify field references sometimes caused records to be rejected because valid field data was misinterpreted as invalid field references. This issue has been resolved. The parsing algorithm has been updated to ensure that characters between hashes are correctly interpreted as valid Field IDs before performing a lookup. | 970322 |
Asset Criticality Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when a team member was added in an Asset Criticality Analysis and then removed from the team, the team member did not reappear in the list of available team members. This issue has been resolved. | 931347 |
Asset Strategy Implementation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Using the Asset Strategy Implementation (ASI) Data Loader, you can now change the status of a Work Management Item (WMI). You can enable or disable this feature by accessing the Asset Strategy Implementation Admin page. | 867509 |
| Description | Tracking ID |
|---|---|
| Previously, when importing a Task List from SAP, data for custom fields was not getting populated in APM datasheet of Task List family. This issue has been resolved. Now, the data for custom fields is getting populated properly on the Task List. | 992518 |
| Previously, when you marked a Task List for deletion and then implemented to SAP, you had to refresh the package to see that the Task List had been removed and avoid unwanted errors. This issue has been resolved. Now, the package is refreshed after sending to SAP. | 940875 |
| Previously, the sequencing functionality within the PRT report generation functionality did not work as expected if there were time intervals such as hours or minutes defined on the Actions. This issue has been resolved. Now, the sequencing will work properly even when the hour or minute intervals are used. | 927539 |
Asset Strategy Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To provide additional flexibility, the maximum number of Controlled Strategies allowed per Asset Strategy Template applied as a Master is now configurable. Previously, the limit of 5000 was enforced in the product. | 943230 |
| Description | Tracking ID |
|---|---|
| Previously, when searching within the Risk and Actions page in ASM and subsequently opening and closing an Risk or Action card, the search text was not retained. This issue has been resolved. Now, the search text is retained even after opening and closing a Risk or Action card. | 997843 |
| Previously, if you adjusted the zoom significantly on the browser, the divider line in the header of the Actions and Risks workspace did not appear properly. This issue has been resolved. | 940108 |
| Previously, if you had created and run an ASO simulation and the linked Asset Strategy was open in another tab, the Asset Strategy page did not display the latest information. This issue has been resolved. Now, a message is displayed to inform you that an ASO simulation has been run, and you need to refresh the tab. | 921998 |
| Previously, if you activated a Strategy Template while on the Template Summary section, the Risk Profile graph did not populate unless you refreshed the page. This issue has been resolved. | 153348 |
Calibration Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Using Work Management Interface (WMI), you can now disable SAP work order confirmation from APM to SAP. For instructions, refer to KBA 000071400. Note: WMI will still create a Confirmation in APM containing the relevant SAP work order or notification details for reference. | 970541 |
| When importing calibration data using the Data Loader, you can now specify the site reference name of a Calibration Profile. | 906640 |
| When performing a calibration, in addition to trueness values, you can now capture precision values. This allows you to ensure that the measurements are more precise, especially when calibrating a critical asset/measurement. To facilitate this enhancement, the following changes have been made:
| 143055 |
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to open the Manage Calibration Tasks page by selecting a Calibration Profile record with more than 2100 assets linked, an error occurred. This issue has been resolved. | 946292 |
Data Loaders
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to load Equipment and Functional Location data into APM using the Family Data Loader, changing the Site resulted in the Equipment or Functional Location data not being updated. This issue has been resolved. Now, the baseline rules have been modified to ensure the data updates correctly when the Site is changed. | 976660 |
| Previously, the date/time fields in Data Loader pages were always displayed in the UTC time zone. This issue has been resolved. Now, the values are displayed based on the time zone preference set in Security Manager. For instructions, refer to KBA 000071314. | 946911 |
Deferral Configuration
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now specify the required deferral state of an Inspection Recommendation. That is, only if the Recommendation is in the specified state, you can defer it. To facilitate this enhancement, the Required State for Deferral Configuration box has been added to the Inspection Recommendation page in Deferral Configuration. | 954161 |
Generation Availability Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the GAA Overview page and the GAA content within the Asset Hierarchy page was loading slower than expected. This issue has been resolved. Now, the performance of both pages has been restored. | 1003153 |
| Previously, the bulk generation of Performance Records took longer than expected to process. This issue has been resolved. Now, the performance has been improved. | 978806 |
| Previously, the calculation of Equivalent Forced Derated Hours (EFDH) was not accurate when events overlapped with the last date and time of the month. This issue has been resolved. | 936722 |
Failure Modes and Effects Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now consolidate Recommendations created from the same template and then promote them to Asset Strategy Management. This allows you to perform Recommendations and manage them efficiently using the Asset Strategy in Asset Strategy Management. | 970431 |
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to consolidate Recommended Actions, the toggle button to merge the selected fields did not work as expected. This issue has been resolved. | 926367 |
| Previously, the delete button in the Secondary Actions tab was not displaying unless the size of the browser window was modified. This issue has been resolved. | 156949 |
Family Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance the Disabled, Required, and Hidden field behaviors, additional operator options namely Is Part Of and Is Not Part Of have been added. You can use these operators along with the Security Group and Security Group Query settings to define the appropriate field behavior. | 960378 |
A new behavior, Query Result, has been added to control field properties based on query output. To facilitate this enhancement, the behavior allows a field to be made Required, Disabled, or Hidden by comparing a left-side field or constant with the result of a query on the right side.
| 156193 |
Family Policies
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now select Notification Type in the Create Recommendation node. | 870548 |
| In addition to JSON parsing, XML parsing is now supported. To facilitate this enhancement, the JSON Parser node is renamed Parser node. | 713446 |
| You can now specify the Attachment Filename in Email Contact Node. | 922741 |
| Description | Tracking ID |
|---|---|
| Previously, when you updated or added the Field Value Changing node, the logical path property was missing. This issue has been resolved. | 958323 |
| Previously, when you modified R Scripts and refreshed a policy metadata, the entity key mapped with the Edit Entity node did not appear in Policy Designer. This issue has been resolved. | 957433 |
Foundation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| A new option has been added to expand text and input fields in the print output. To facilitate this enhancement, the Print dialog box now includes an Expand text fields to fit content option. Note: This setting will be saved in the user’s preferences. | 974125 |
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to log in to APM, an error occurred in the SSO login page and a blank screen appeared. This issue has been resolved. | 958084 |
General Dashboards
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if you copied and pasted the UNC value in the link path instead of selecting it in the file browser, the link did not work after saving. This issue has been resolved. | 915767 |
Inspection Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now choose to auto-generate the Inspection Task ID when creating an Inspection Task. To facilitate this enhancement, a new option named Auto-Generate Inspection Task ID has been added to the Inspection Configuration workspace. | 971440 |
| Using Work Management Interface (WMI), you can now disable SAP work order confirmation from APM to SAP. For instructions, refer to KBA 000071400. Note: WMI will still create a Confirmation in APM containing the relevant SAP work order or notification details for reference. | 970541 |
| The Deferral Configuration for the Inspection Recommendation family has been enhanced to define the state required to defer an Inspection Recommendation. By default, the Approved state (MI_APPROVED) is considered. You can change it to a different baseline state or a custom state if needed. Only if the Recommendation is in the specified state, you can defer it. | 954161 |
To enhance usability, you can now easily define the Inspection Method for the Category using the Expand ( ) button. To facilitate this enhancement, in the Manage Scope for Task page, the Expand button has been moved from the far right to the left, and the icon has been replaced with a chevron. | 858341 |
Task execution records are now created automatically when a task is addressed using an Inspection Event and the Inspection Task Complete check box is selected. To facilitate this enhancement, the following changes have been made:
| 687888 |
A task revision is now created automatically whenever there is an update to a field on an Inspection Task where that field also exists in the Inspection Task Revision family. To facilitate this enhancement, the following changes have been made:
| 687888 |
| You can now access the Inspection Task Revision data in the Inspection Task page. To facilitate this enhancement, a new section has been added under the Related Records tab. | 559584 |
| Description | Tracking ID |
|---|---|
| Previously, if the SAP Work Management or the Thickness Monitoring license was not active, loading the Related Records section of an Inspection Task failed. This issue has been resolved. | 1001686 |
| Previously, if you changed the Task Type in an Inspection Task, and if the Override Interval field was set to false, the value in the Desired Interval field was set to 0. This issue has been resolved. | 975597 |
| Previously, if you attempted to create an inspection where the automatic creation of General Findings was enabled and the asset contained multiple Inspection Profile records where the Item Category and the Item ID fields contained differing values, the inspection creation failed. This issue has been resolved. | 975906 |
| Previously, if you were assigned the MI Contract Inspector role and attempted to transition the state of an Inspection to Pending Approval, an error occurred even if the Inspection Report Owner field was populated. This issue has been resolved. | 946763 |
| Previously, error messages from SAP were not displayed in the scheduled work order job logs even though they were available in the Splunk logs. This issue has been resolved. | 909548 |
| Previously when transitioning the state of an Inspection, if the Inspection had an associated Inspection Recommendation and if you had disabled the Use State Management for Inspection Recommendations option in the Inspection Admin Preferences page, the Recommendation’s status was also updated. Occasionally, it resulted in an error message due to user fields not being properly set on the Recommendation record. However, these error messages were ambiguous and did not specifically indicate which record the error was related to. This issue has been resolved. Now these messages provide the record ID to help you identify and resolve the issue. Note: This is not a recommended workflow. You must enable the state machine for Inspection Recommendations. | 870512 |
Life Cycle Cost Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the entered cost data was not displaying properly in the Cost Data grid and the corresponding Analysis Summary graphs. This issue has been resolved. | 1008374 |
Policy Designer
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now select Notification Type in the Create Recommendation node. | 870548 |
| In addition to JSON parsing, XML parsing is now supported. To facilitate this enhancement, the JSON Parser node is renamed Parser node. | 713446 |
| You can now specify the Attachment Filename in Email Contact Node. | 922741 |
| Description | Tracking ID |
|---|---|
| Previously, when you modified R Scripts and refreshed a policy metadata, the entity key mapped with the Edit Entity node did not appear in Policy Designer. This issue has been resolved. | 957433 |
Production Loss Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when attempting to save a Production Profile for a product that already contained a Production Profile for that unit, an error occurred. This issue has been resolved. | 973119 |
Queries
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now control the nested loop execution plan within the Query Designer. To facilitate this enhancement, the following changes have been made to the application, a new setting has been introduced in the Query Designer that allows you to enable or disable the nested loop option for individual queries. Note: This setting is saved along with the query in the catalog, ensuring consistent execution behavior. | 992117 |
| Access to tables or views associated with families is now restricted - only the users who have the required security privileges to the families can access the tables or views. To facilitate this enhancement, a new check box named Validate Tables/Views for access has been added in the Query Settings page. | 960486 |
| Description | Tracking ID |
|---|---|
Previously, if a text field in a JS Trigger dialog contained a value with an & character, the entire value following the & was trimmed.This issue has been resolved. Now, the full value, including characters after the & is retained and displayed correctly in the JS Trigger dialog. | 991072 |
Previously,  on the Query Results screen shifted from the center to the upper left corner when toggling between tabs.This issue has been resolved. | 989463 |
Record Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
A new behavior, Query Result, has been added to control field properties based on query output. To facilitate this enhancement, the behavior allows a field to be made Required, Disabled, or Hidden by comparing a left-side field or constant with the result of a query on the right side.
| 156193 |
Reliability Analytics
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To improve performance, copying a Scenario in System Reliability is now performed by the Job Scheduler. | 960191 |
| Description | Tracking ID |
|---|---|
| Previously, when creating a Reliability Growth Analysis from a Dataset containing cumulative operating time, an unexpected error appeared. This issue has been resolved. | 1005071 |
| Previously, when creating new Reliability and Probability Distribution, Growth, and Production Analyses, the performance was slower than expected. This issue has been resolved. Now, performance is restored when creating these analyses. To ensure optimal performance, any query selected from the catalog must include the Entity Key, Family Key, and Site Key for all families referenced in the select clause. | 995320 |
Reliability Centered Maintenance
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now consolidate Recommendations created from the same template and then promote them to Asset Strategy Management. This allows you to perform Recommendations and manage them efficiently using the Asset Strategy in Asset Strategy Management. | 970431 |
| Description | Tracking ID |
|---|---|
| Previously, when data loading an existing RCM Analysis failed because it was in approved State, the error log displayed the Analysis ID only. This issue has been resolved. Now, the error log displays the Analysis Description also. | 1001511 |
| Previously, when consolidating Recommendations for a picklist field the toggle button was not working properly. This issue has been resolved. Now, the toggle button is working as expected when attempting to consolidate a picklist field. | 951294 |
| Previously, when you attempted to consolidate Recommended Actions, the toggle button to merge the selected fields did not work as expected. This issue has been resolved. | 926367 |
| Previously, the delete button in the Secondary Actions section did not appear unless the size of the browser window was modified. This issue has been resolved. | 156949 |
Risk Based Inspection
This topic provides a list of product changes released for this module in this version.
RBI 580 and RBI 581
| Description | Tracking ID |
|---|---|
| You can now map RBI Components linked to an Asset on the Schematic View (2D Visualization) and visualize the risk of the components. To enable this enhancement, you can now access Schematic View from the Asset Summary workspace. An active Mechanical Integrity 2D Visualization license is required to avail this functionality. | 921600 |
| You can now model an RBI Component as a Sphere. To facilitate this enhancement, a new component type named Sphere has been added and is available when creating components with the Cylindrical Shell family. Additionally, Sphere has been added to the Equipment Types family. This enhancement will allow for the calculation of inventory for spheres for both RBI 581 Risk Analyses and RBI 580 Criticality Analyses. | 916882 |
| You can now customize field mappings from RBI Recommendations to Actions when promoting an RBI Asset to Asset Strategy Management. To facilitate this enhancement, the field mappings for RBI Recommendation to Actions have been moved to Policy Manager and a new policy named RecommendationToActionMapping has been added. | 880136 |
| You can now customize field mappings from RBI Degradation Mechanisms to Risks when promoting an RBI Asset to Asset Strategy Management. To facilitate this enhancement, the field mappings for RBI Degradation Mechanisms to Risks have been moved to Policy Manager and a new policy named DegradationMechanismToRiskMapping has been added. | 880134 |
| To improve usability, you can now open the RBI Bulk Evergreening workspace from the Process Unit workspace. The RBI Bulk Evergreening workspace will display any analyses eligible for evergreening, which are linked to assets related to the given process unit. | 867344 |
| An error message will now be displayed when finalizing the risk of an RBI Analysis that has not been calculated after additional field changes have been made. This will be indicated on the RBI Analysis page by the orange-colored calculator button. This option can be turned off by clearing the Calculation Required before Risk Completion check box under the RBI Admin Settings. | 867341 |
| Description | Tracking ID |
|---|---|
| Previously, analyses in custom states were considered active and were included when rolling up the risk categories for an Inspection Plan. This issue has been resolved. Now, analyses in custom states are excluded from the risk category roll-up for an Inspection Plan. | 1019742 |
Previously, if an RBI Analysis was in any state other than Created or Archived, it was marked as Active in the RBI Tree (indicated by  ). This issue has been resolved. Now, any custom state is marked Inactive in the RBI Tree (indicated by  ). | 1019738 |
| Previously, when finalizing an RBI Criticality Analysis with a configured Risk Category value, an error occurred. If the Alternative Inspection Plan was enabled, the error occurred while updating the inspection plan. This issue has been resolved. Now, user-configured risk categories are not considered in the RBI Inspection Plan Risk Category field. | 1012586 |
| Previously, tile counts were not displayed on the Risk Based Inspection Overview workspace due to performance issues. To enhance performance of the Risk Based Inspection Overview workspace, the following catalog query has been updated: Public\Meridium\Modules\Risk Based Inspection\Queries\Inspections More Current Than All Analysis | 967980 |
| Previously, the Require Calculation field, which turns the Calculator button to orange on the RBI Analysis Page, was not set to true on analyses when linking or unlinking TML Groups from the parent RBI Component. This issue has been resolved. | 959779 |
| Description | Tracking ID |
|---|---|
| Data Mapping between the RBI Component field CM Corrosion Rate and the Analysis field Cladding Material CCT has been removed as it is no longer valid. | 697550 |
RBI 581
| Description | Tracking ID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Previously, the Personal Injury Constants for Acid-LP, Acid-MP, and Acid-HP were incorrect. This issue has been resolved. As a result, the SHE consequence area for these specific fluids may be affected. To update any pre-existing analyses, which will be affected by this change, follow the steps in KBA 000071457. | 996649 | ||||||||||
To improve usability, while duplicating an RBI 581 Risk analysis, creating a 581 What-If analysis, or applying an RBI 581 Risk Analysis within the RBI Asset, the linked inspections on the following Degradation Mechanism Evaluations will automatically be assigned to the Degradation Mechanism Evaluations in the newly created RBI 581 Risk analysis, if the Use Combined Confidence check box is selected:
| 943747 | ||||||||||
To improve usability, while duplicating an RBI 581 Risk analysis, creating a 581 What-If analysis, or applying an RBI 581 Risk Analysis within the RBI Asset, the linked inspections on the following Degradation Mechanism Evaluations will automatically assigned to the Degradation Mechanism Evaluations in the newly created RBI 581 Risk analysis if the Use Related Inspection check box is set checked:
| 943743 | ||||||||||
| To improve usability, the Allow Override of SHE Consequence Area field in an RBI 581 Consequence Evaluation is now dynamically disabled in scenarios where the SHE Consequence is not considered. To facilitate this enhancement, Allow Override of SHE Consequence Area is only enabled if the parent RBI 581 Risk Analysis is not linked to an RBI 581 HE Bundle Damage Evaluation and the Component Type of the parent RBI 581 Risk Analysis is not set to Storage Tank Bottom. | 919151 | ||||||||||
New materials are added to support RBI 581 calculations. To facilitate this enhancement, the following Material Cost Lookup records have been added:
| 867333 | ||||||||||
| Risk Mapping for an RBI 581 Risk Analysis linked to an RBI 581 HE Bundle Damage Evaluation is now performed using a new policy named MI_581HETB-DEF-RISK_MAPPING-OPERATIONS. This policy is used to map values from an RBI 581 Risk Analysis with values plotted on the default Risk Matrix. Note: If you use a customized Risk Matrix, you must add the required RBI Risk Matrix Mapping records and update the policy to map with the custom Risk Matrix. | 365655 |
| Description | Tracking ID |
|---|---|
| Previously, in an RBI 581 HE Bundle Damage Mechanism, the adjusted characteristic life (Adjusted ETA) calculation for methods 1 and 2 was incorrect if the Highest Effective Inspection field was set. This issue has been resolved. | 996332 |
RBI 580
| Description | Tracking ID |
|---|---|
| To improve usability, while duplicating an RBI Criticality Analysis, creating a 580 What-If analysis, or applying an RBI Criticality Analysis within the RBI Asset, the linked inspections on the Degradation Mechanism Evaluation will be automatically assigned to the Degradation Mechanism Evaluations in the newly created RBI Criticality Analysis if the Use Combined Confidence field is selected and the inspection falls within a 20-year duration. | 943749 |
Root Cause Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To improve usability, the Root Cause Analysis (RCA) application has been enhanced to improve the layout of the flags on the Event Timeline and prevent overlapping within the UI and in the exported file. This also includes the introduction of a collapsible panel for the list of Events, as well as enhanced zoom functionality. | 972455 |
| You can now navigate directly to the verification tasks listed at the end of the Analysis Summary section through a hyperlink. | 960626 |
| A baseline RCA Analysis product data loader is now available, which allows you to upload new or modified RCA Analyses in bulk. | 960094 |
| You can export multiple RCA Analyses in bulk. The exported file is in the Root Cause Analysis (RCA) Data Loader format. Therefore, after modifying the analyses, you can upload them into APM; the analyses are then updated in APM. You can also share the analyses with non-APM users. | 940137 |
| You can now import Work History events into the Event Timeline. | 160548 |
| Description | Tracking ID |
|---|---|
| Previously, RCA users who were not RCA Analysis team members were allowed to update RCA Recommendations from Record Manager. This issue has been resolved. | 968729 |
| Previously, the RCA logic tree took a long time to save when navigating away even when no changes were made. This issue has been resolved. Now, the performance when navigating away from the RCA logic tree is improved. | 952829 |
| Previously, when you added or modified nodes in the Event Diagram, the connecting lines overlapped the nodes. This issue has been resolved. Now, all connecting lines will display behind the nodes. | 947494 |
| Previously, when copying and pasting nodes in the RCA Logic Tree, the order of the nodes displayed was changed after refreshing the screen. This issue has been resolved. Now, all pasted nodes will be displayed in the same order as they were pasted. | 942152 |
Rounds Pro
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Readings and pictures taken from the Rounds Pro mobile app will now sync to the APM app server in the background. This will help review the data on the server in near real time, and also to review the data collected on the route instance before using the Cancel check-out Functionality. | 995297 |
| When creating or modifying a Route Master, you can now specify the maximum number of Route instances that can be created. This helps limit the number of open instances for a Route. The default value is 2. | 942175 |
| You can now define and display custom fields on the Measurement Step page. | 941778 |
| You can now cancel the check-out of a Route instance in case you have checked it out by mistake. The Route can then be checked out by other users. | 938013 |
| You can now view readings associated with a specific step directly from the Designer view. To facilitate this enhancement, a new History tab has been added to the step view in Designer, enabling you to access and review previously taken readings. | 869917 |
| The location is now captured when an operator records a step reading or creates a recommendation in the Rounds Pro Mobile App. To facilitate this enhancement, the captured location data is now viewable in Maps. | 714743 |
| Conditional Step data loader will now support Conditional steps from different Assets. To facilitate this enhancement, the data loader has been updated with the new field, Conditional Step Asset Id, and Conditional Step CMMS System. | 587132 |
| You can now create steps along with their conditional steps when applying a Step Template to an asset. To facilitate this enhancement, Step Templates have been updated to support Conditional Step Templates. | 144086 |
| Description | Tracking ID |
|---|---|
| Previously, route instances that were created by an administrator or a user in Rounds Pro Mobile were removed when you previewed a route master. This issue has been resolved. | 1018162 |
| Previously, when you migrated Steps that have Conditional Steps using the Migration Tool, then the values did not get displayed in the Assets, Operator, Conditions fields. This issue has been resolved. Now, the values in the specified fields are loaded successfully and appear correctly. | 996684 |
| Previously, the Migration Tool migrated a Lubrication Step to Global site, even though the Legacy Lubrication Requirement belonged to an actual site. This issue has been resolved. Now, the Lubrication Step will have the same site as the Legacy Lubrication Requirement. | 974099 |
| Previously, the Next Date field on the Route Master grid is not populated, even though the Route Master has a schedule. This issue has been resolved. Now, the Next Date field gets populated based on the Schedule defined in the Route Master. | 956794 |
| Previously, when you attempted to print a Route Instance, an error occurred if the Route Instance was created from a Schedule. This issue has been resolved. | 949743 |
| Previously, when you selected the Manage picklist option in Rounds Designer page, a 502 bad gateway error appeared and the picklists were not loaded. This issue has been resolved. Now, the picklists are displayed without any error. | 949740 |
| Previously, the Migration Tool job status remained at In Progress. This issue has been resolved. | 945119 |
| Previously, the Migration Tool created duplicate Readings if you selected the Readings option and ran the tool again for the same route. This issue has been resolved, | 945119 |
| Previously, if the Migration Tool was run for steps that had a schedule type set to selected days of a month, the migration failed for those steps. This issue has been resolved. Now, the Migration Tool will migrate those steps also. | 916936 |
| Previously, the Route Master Grid displayed duplicate records when you set Rows per page to 100 or more. This issue has been resolved. Now, the Route Master Grid no longer shows duplicate records regardless of the Rows per page setting. | 875879 |
Previously, the Step Reading Data Loader returned an Asset not found error even when valid asset information was provided. This issue has been resolved. Now, the Step Reading Data Loader accepts Step Name, Asset, and CMMS System data to uniquely identify the step and associate a reading. | 720225 |
Previously, the Step Readings Data Loader returned a Step not found error occasionally. This issue has been resolved. Now, the Step Readings Data Loader will use the Asset ID instead of ENTITY ID. | 720225 |
R Scripts
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the error message from an output parameter was generic and unclear. This issue has been resolved. Now, the error message is specific and includes the name of the variable. | 937716 |
Security Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, user defaults were not used to get any default value for a newly created user, including the default site. This issue has been resolved. Now, if a user has a default site set in the AD sync page, that site will be taken as the default. If not, the first site assigned to the user in alphabetical order will be taken as the default site. | 958052 |
SIS Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To prevent deleting a SIL Analysis accidentally and losing data, you can now delete a SIL Analysis only if deletion has been enabled by a SIS Administrator. To facilitate this enhancement, a new preference named Allow Deletion of SIL Analysis has been added in the SIS Admin Preferences page. By default, this field is set to true. | 988988 |
State Management is now supported for the Proof Test Task family. Most states and operations are reserved and will be transitioned automatically when you complete a SIS Proof Test event. However, if needed, you can also manually transition a Proof Test Task to the Rejected state. In addition:
To facilitate this enhancement, the following queries have been modified:
| 973566 |
Support for the creation of Task Execution records has been added. Task execution records are now created when you address a task in a SIS Proof Test event and select the Functional Test Complete. To facilitate this enhancement the following changes have been made:
| 973566 |
Support for Proof Task Revision has been extended with more information. Task revisions are created whenever there is an update to any field in Proof Test Task family. To facilitate this enhancement the following changes have been made:
Note: Fields are mapped to the Proof Test Task Revision based on the fields shared between the Proof Test Task parent and Proof Test Task Revision child family in Family Configuration Manager. If you have a custom field in the Proof Test Task family that you would like to have mapped to the revision, you can add the same field to the child revision family and it will be automatically mapped during creation. | 973566 |
| To enhance usability, the MTTFS contribution chart is now plotted based on STR values. | 947712 |
| To enhance usability, the Apply Template window now displays Protective Instrument Loop Templates in a result grid instead of a list. | 936695 |
| Description | Tracking ID |
|---|---|
Previously, if a UOM Conversion set was configured for the user, the search functionality did not work as expected when retrieving Proof Test Tasks to be linked to an Instrumented Function or Logic Solver using the following queries.
| 971990 |
| Previously, on applying a Protective Instrument Loop template, it failed in cases with large counts of elements because of a timeout error. This issue has been resolved. The Apply Template functionality is now implemented using a scheduler job. | 941782 |
| Previously, while changing the Sensor Type in Protective Instrument Loop Sensor, Sensor and Connection devices were not getting reset as per the new selection. This issue has been resolved. | 931980 |
Thickness Monitoring
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance consistency, the Remaining Life from Today value will now be displayed as 0 in both the Analysis Output tab and the TMLs tab. Previously, this value appeared as an empty cell in the TMLs tab. | 902477 |
| To enhance usability, if the Correct Measurement Based on Growth check box in the Measurement Preferences section in the TM Admin Preferences page is not selected, the Check for Growth field is disabled. | 876266 |
| The GE Device Service now installs and configures the SSL certificate required to allow for connection with APM when executing over a secured connection such as HTTPS. The installation of this certificate was previously a manually process and required executing KBA 000055071. Note:
| 870518 |
The following additional fields have been added to the TM Quick View page:
| 866560 |
| The Thickness Measurement – Assets dataloader now supports user-defined Inspection Families. To facilitate this enhancement, the provided dataloader template has been updated to include a column for specifying the desired Inspection Family ID. You can now enter the appropriate ID within this column to create Inspections belonging to any desired family, rather than being limited to the default General Inspection family. | 852305 |
| Description | Tracking ID |
|---|---|
| Previously, custom formatting behaviors applied to the Measurement Value field within the Thickness Measurement family were not correctly displayed in the Piping Rotation feature’s Heat Map table. This issue has been resolved. Now, custom formatting behaviors are correctly executed and displayed within the Heat Map table, providing accurate visual representation of measurement values. | 870505 |
| Description | Tracking ID |
|---|---|
The following Dataloggers have reached end-of-life and will no longer be available:
| 740847 |
User Experience Settings
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| A new module named User Experience Settings has been introduced under . Using this module, you can customize the footer color to provide a visual cue that identifies the tenant type (for example, test, production). | 528497 |
Workflow Solutions
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| In the Asset Health and Maintenance Assessment (AHMA-20250314) package, you can now re-apply templates to existing assets, enabling the addition or update of inputs and their configurations. | 947688 |
| In the AHMA-20250314 package, you can now use pre-existing Conditions and Conditional Steps in Rounds and Rounds Pro modules respectively. | 947688 |
The library of AHMA Templates has been extended for the following asset-types :
For more information, refer to AHMA Assets List. | 945735 |
In AHMA-20250506 package, Asset Maintenance Index (AMI) scoring has been improved. To facilitate this enhancement, the following changes have been made:
| 945735 |
| In SHW Package (20250310) package, you can now view the HI source information in the System Asset Analysis widget of the System Health Monitoring Workflow dashboard, to distinguish whether a Health Indicator was generated from EHW or AHMA. To facilitate this enhancement, a new column, HI_SOURCE, has been added in the System Asset Analysis widget. | 918367 |
| In Daily O&M (20250311) package, you can now view details of the ACC Alerts Family in the Analytics Driven Alert List – (Last 72 Hours) widget. To facilitate this enhancement, the query for the widget has been updated to replace Predix-Alerts with ACC Alerts Family. | 904853 |
| In Daily O&M (20250311) package, you can now view data from both RoundsPro and Legacy Rounds, in the Rounds Deviation widget of the Daily O&M Coordination Dashboard. To facilitate this enhancement, the underlying query in the widget has been updated. | 904853 |
| Description | Tracking ID |
|---|---|
| Previously, in the AHMA (20250506) package, the Weightage of Grouped Analytics displayed the weight of the Health Indicator instead of the intended weightage for Grouped Analytics. This issue has been resolved. | 945735 |
| Previously, in the AHMA (20250506) package, Health Indicator records for Analytics and Alert-HI were created for assets in the application even when the Analytics option was set to null during template application. This issue has been resolved. | 945735 |
Previously, in the AHMA (20250506) package, duplicate or null Policy Instances were being created in the MI_ACC_CAC_Create Update_Alerts_Cases policy. This issue has been resolved. | 945735 |
| Previously, in the AHMA (20250506) package, inputs in the User Template remained marked as Active even when they were set to Inactive in the Master Template during User Template creation. This issue has been resolved. | 945735 |
| Previously, the Recalculate All Asset Health Indices hyperlinks under the Bulk Execution widget in the Execute Health Algorithms dashboard (EHW Package 20250310) did not work as expected. This issue has been resolved. | 927896 |
| Description | Tracking ID |
|---|---|
| Accessing the AHI Details View, CI Analysis, or Config dashboards in the AHMA package results in an error. Workaround:Open the dashboard filter and save it to resolve the issue. For more information, refer to KBA 00007095. | 721067 |