First Quarter of 2019
Risk Based Inspection (RBI) 581
This topic provides a list of product changes released for this module on the dates listed below.
RBI 580 and RBI 581
Release Date: March 25, 2019
| Note | Tracking ID(s) |
|---|---|
| Previously, when you were using a Risk Matrix other than Default or Standard Practice Risk Matrix, the categories defined in the MI_RISK_CATEGORY System Code Table had to be capitalized to correctly map RBI risk values. This issue has been resolved. Now, the values do not have to be capitalized. | DE104014 |
Release Date: March 29, 2019
| Note | Tracking ID(s) |
|---|---|
|
To enhance usability, the datasheet content for the following families has been reorganized:
|
|
When viewing an analysis in the RBI module, you can now make changes to the analysis only if it is in the Created state. When you change the state of the analysis to any other state, the analysis and related records cannot be modified, and the Save button ( ) is not available.Note:
The following fields in the Degradation Mechanism family are no longer editable:
| US304996 |
| You can now use a utility to generate Risk Assessment records for active RBI Criticality Analyses and RBI 581 Risk Analyses that do not have Risk Assessment records. Also, for the active RBI Criticality Analyses, the utility will calculate and set Half-Life for any related Ext. Corr. Deg. Mech Evaluations where the value is blank. After the utility is executed, the RBI 580 and RBI 581 analyses can be promoted to ASM, and RBI Recommendations can be generated for the active RBI 580 analyses with Ext. Corr. Deg. Mech Evaluations. | US272821 |
To reflect the changes in Addendum-1 of API-581 3rd Edition, the Component Damage and Personal Injury Area calculations for Type-1 flammable fluids have been modified as follows:
| US322083 |
You can now promote an Asset to Asset Strategy Management if all the RBI Components within the Asset contain an RBI Analysis in any of the following states:
| US272476 |
| You can now show or hide the analyses that are in the Archived state in the Component Overview page. To facilitate this enhancement, a new option, Hide Archived Analyses has been added to the Component Overview page. | F38674 |
| Note | Tracking ID(s) |
|---|---|
| Previously, when you were using a Risk Matrix other than Default or Standard Practice Risk Matrix, the categories defined in the MI_RISK_CATEGORY System Code Table had to be capitalized to correctly map RBI risk values. This issue has been resolved. Now, the values do not have to be capitalized. | DE103968 |
| Previously, if the Asset Hierarchy was configured to use the Equipment Has Equipment relationship, the Asset Hierarchy navigation links could not differentiate between a parent Equipment and a child Equipment. This issue has been resolved. | DE103536 |
| Previously, in an RBI Consequence Evaluation, in the Design Details section, the Consequence field was not translated. This issue has been resolved. Now, the Consequence field is populated by the MI_CONSEQUENCE_TYPES System Code Table, which is translated to the appropriate culture setting. | DE94112 |
| Previously, when you attempted to select an RBI Component from the Asset Details page, an error occurred. This issue has been resolved. | DE90981 |
| Previously, in an RBI Component or RBI Analysis, in the Design Details section, the Stress Lookup Table field was not translated. This issue has been resolved. Now, the Stress Lookup Table field is populated by the MI_STRESS_LOOKUP_TABLE System Code Table, which is translated to the appropriate culture setting. | DE90270 |
| Previously, in an Oracle database, when you calculated multiple assets in bulk that had more than 500 collective analyses, a timeout error occurred. This issue has been resolved. | DE88531 |
Previously, the allowable stress and flow stress values for a Pressure Vessel component were populated incorrectly if you used the following combination of values:
This issue has been resolved. | DE87370 |
| Previously, if a component had an analysis in the Approved state and, in the same component, you changed the status of another analysis to make it active, the previously active analysis was not moved to the Archived state automatically. This issue has been resolved. | DE92905 |
Previously, if your culture setting had a culture other than English, and you accessed the Risk Based Inspection Overview page, the following elements were not translated to the language based on your culture setting:
| US310483 |
Risk Based Inspection (RBI) 580
Release Date: March 29, 2019
| Note | Tracking ID(s) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
You can now configure the calculation of RBI Criticality Analysis as per your requirement without modifying the baseline rules. You can configure the calculation in one or more of the following steps:
To facilitate this enhancement, following changes have been made:
| F38674 |
Release Date: March 29, 2019
| Note | Tracking ID(s) |
|---|---|
|
Previously, when you calculated an RBI Criticality Analysis for a Heat Exchanger Bundle component, the following incorrect validations were performed:
These issues have been resolved. Now, the following validations are performed:
| DE94278 |
| Previously, in an RBI Consequence Evaluation, the Consequence field was not translated. This issue has been resolved. The Consequence field now displays the system code description of the MI_CONSEQUENCE_TYPES system code table and is translated to the appropriate culture setting. | DE94112 |
| Previously, in an RBI Component or RBI analysis, the Stress Lookup Table field was not translated. This issue has been resolved. Now, the Stress Lookup Table is populated with the MI_STRESS_LOOKUP_TABLE system code table description, which is translated to the appropriate culture setting. | DE90270 |
| Previously, the information on the valid values for the Selected Corrosion Rate field was incorrect in the Data Loaders section of the Risk Based Inspection (RBI) 580 user documentation. This issue has been resolved. | DE98980 |
Risk Based Inspection (RBI) 581
Release Date: March 29, 2019
| Note | Tracking ID(s) |
|---|---|
The following RBI 581 DM calculations are no longer dependent on the R Server:
|
|
| Note | Tracking ID(s) |
|---|---|
Previously, the fluid type of the following representative fluids was incorrectly marked as Reactive instead of Flammable:
This issue has been resolved. Now, the fluid type of these fluids is marked as Flammable. | DE101410 |
| Previously, in an RBI 581 Risk Analysis, if the time specified in the RBI Date field was later than the time specified in the Plan Date field, the Target Inspection Date field was updated incorrectly when you calculated the analysis. This issue has been resolved. Note: This issue was applicable to both the main RBI 581 Risk Analysis and the What-if Analysis. | DE83090 |
| Note | Tracking ID(s) |
|---|---|
The following R Scripts have been removed from RBI 581 policies:
|
|