The ModBus^® Monitor reads monitoring and status information collected by GE Vernova LEADER™ power management devices as well as standard ModBus^® RTU devices. It connects two ModBus^® RTU networks implemented on RS485 wiring, and operates at baud rates up to 19,200 bps. It can monitor up to 492 devices on two networks. It provides convenient, centralized viewing of data from remote devices. A local event log is maintained and a global event log may be viewed when a Multilin Control System is present.

The Type ET-5 Light Emitting Diodes (LED's) are a metal base design, available for panels up to 1/4 inch thick under one catalog number, and available for 1, 1-1/2, and 2 inch thick panels under another catalog number.

The Type ET-6 indicating LED lamp is of a molded base design and is available for thin panel applications up to 1/4 inch.

The Type ET-5 metal base indicating lamp is available for l/8- and 1/4-inch-thick panels under one catalog number, and under another catalog number for 1-, 1 1/2-, and 2-inch-thick panels. Also available for thinpanel applications, up to 1/4-inch is the molded-base Type ET-6 lamp.

These indicating-lamp combinations should be applied where good visible indication, long lamp life, and low-wattage consumption are desirable. They can be used for signal-light indication or in combination with control switches to show circuit-breaker position.

Sales of this product have been discontinued.
As an alternative, please refer to the 
MMLB and MMLG or P991 14-way injection test blocks and P992/3.

Manufacturing for XRT has been discontinued.

Model No. XRT12A covers a set of relay tools contained in a flexible vinyl pouch. The set consists of 18 selected tools, of suitable variety, for the proper maintenance of General Electric relays. Individual tools are described in the brochure.

Manufacturing for XCA has been discontinued.

Three different XCA test plugs are available to provide an easy means of testing C-case drawout relays without removing them from their cases.